60HP Safety Clutch 1 3/4 20 spline female 1 3/8 Male

Description

60HP Capacity Safety Clutch 200 mm (8″) Diameter
1 3/4″ x 20 spline Female/ 1 3/8″ x 6 spline male.

REMEMBER THIS!
To adjust all BARE-Co PTO clutches:
•  Compress springs fully then back off 2 turns.
•  Fine tune so that the clutch slips occasionaly
•  On 20 spline models, clutch retaining (clamp) bolts must be tightened to 150 ft/lbs
   to clamp clutch to shaft – LOOSE BOLTS = STRIPPED SPLINES.
•  Once per year release springs completely and allow clutch to slip to polish pressure plate.